Wholesale Cuisinart Easypop Popcorn Maker Prices Dewalt Dw618
baby gate extra wide On Sale! baby gate extra wide , Special Prices, Setup Assistance, 24/7 Support.
Saturday, December 24, 2011
Kidco Extra 42" Tall Center Gateway
Thursday, December 15, 2011
Dreambaby Extra Tall Pressure Mount Hallway Gate with extensions, White
!±8± Dreambaby Extra Tall Pressure Mount Hallway Gate with extensions, White
Post Date : Dec 15, 2011 14:06:46 | Usually ships in 24 hours
Dream Baby Extra Tall Hallway Security Gate Combo The Dream Baby Extra Tall Hallway Security Gate includes the Extra Tall Hallway Security Gate and two extenisons, one 3 1/2 in. and one 7 in. The baby gate and extensions come in two colors to fit just about any home decor. The safety gate measures 1 meter in height which is different than any other baby gates. Dream Baby makes baby gates which are durable and will last long to work with pets as well. The safety gate also swings closed autom
- Fits an opening of 38"-53" using the included extensions
- Each gate will accept a maximum of two extensions
- Closes automatically
- One 3.5" extension and one 7.0" extension
- Mounting cups for optional use
Tuesday, December 6, 2011
Security Camera System - Buyer's Guide
Although the application of CCTV security have not changed very much over the past years, the tools and equipment have significantly. Cameras became smaller, cheaper and better, but the major breakthrough happened in recording equipment.
Therefore many customers shopping for complete CCTV monitoring and recording systems are confused by such a verity of available products. Goal of this article is to guide buyers toward best possible and most economical type of CCTV equipment, based on intended implementation and requirements.
Selecting the right cameras.
It is virtually impossible to describe all types of available ones in this short article. We will focus our attention on most popular and widely used camera types instead.
CCTV security cameras produce images using CMOS or CCD (Charge Couple Device) chips. Tiny, very low price CCTV cameras usually use CMOS technology, produce poor quality images and have very poor light sensitivity. Decent quality CCTV cameras use CCD technology. The size of the CCD chip is normally 1/4", 1/3" or 1/2". As a rule of thumb, the larger the size, the higher the quality of the image produced and the higher the price. However, higher density 1/4" and 1/3" CCD chips can now produce as good an image as many 1/3" or 1/2" chips.
The number of TV lines in the security camera image is a measure of picture resolution (sharpness). The larger the number of TV lines, the better the resolution and hence, overall picture quality. Standard resolution camera may have 350-380 lines, over 400 TV Lines is generally considered good resolution while over 500 TV lines is considered high resolution. B/W chip cameras produce greater resolution and better light sensitivity, therefore suitable for use in dark areas where light conditions are poor most of the time.
On the other hand color cameras offer more realistic and natural picture. CCTV cameras are usually divided into different types based on the body of the camera used.
Professional grade cameras.
Have box type body with the ability to use different types and size of lenses. Exchangeable lenses enable this camera, to monitor objects from virtually any distance. Although for indoor use, they can be used for outdoor when combined with weatherproof housing. They are considered to be the most flexible and widely used by professionals for commercial installations.
Bullet cameras.
Bullet cameras are, as the name suggest contained inside bullet shaped housing.
Most bullet cameras are weatherproof and sealed without the ability to use different lenses. Great advantage of bullet camera is the small size and integrated design, some bullet cameras will even have infrared LED future built-in. Infrared technology is simply LED light in infrared spectrum (not visible to human eye). This light will illuminate viewing area, making possible monitoring in complete darkness. This is great future, but it only works up to certain distance (usually between 10 and 50 ft. depending on model) Vary simple to install and estheticly designed, bullet cameras are great choice for residential and do-it-yourself installations where monitoring objects are within about 25ft from the camera location (with standard 3.6mm lens).
Board Cameras.
Board Cameras are basically fixed lens mounted on a circuit board. These cameras may be packaged in a small case (Mini Cameras) or dome (Mini Dome) or simply sold unpackaged, for mounting by the purchaser. Lenses in these are either of a normal industry aperture or a "pinhole" lens of very small aperture. Pinhole lens cameras are often called "spy" cameras and may be mounted in a concealed way for covert surveillance purposes. The most popular examples of covert board ones are smoke detector and motion detector cameras.
Since the lenses in board cameras are pre-mounted, have a fixed iris and are usually of a short focal length (i.e. wide angle), their flexibility of usefulness is limited. However, this type of camera can provide a low cost solution in the right situation, particularly in a home environment. We have shortly described most popular types of cameras, lets now discus, how and where they mite be used.
Professional types with C/CS mount lens attachment generally offer best performance and many important futures, like lens control output, Back Light Compensation and many more...
Distance from monitoring object to the camera is not an issue, that is why ability to select different lenses, based on location is so important. Installation is bit complicated and professional installation strongly recommended. We recommend this type of security cameras for commercial installations.
Most Bullet cameras in comparison, do not offer high resolution and lens selection flexibility, but are likely to be weatherproof, some will have infrared light built-in and most of all they are relatively easy to implement. They usually come with 3.6mm lens witch are considered to be suitable for most standard installations (good for covering small to medium size room or equivalent).
For larger rooms or longer distances, cameras with 6mm or higher lens may be required. They are great choice for any do-it-yourself installation.
Board cameras in contrast are widely used in covert camera installations, sometimes called Spy Cameras. Many are basically board ones with built-in transmitter. We are not going to go into wireless cameras right now, as this would be enough material for completely new article.
Board cameras are sold as plain circuit board, for integrating into hidden camera devices. They are also available in dome housing, as vary popular Dome Camera or integrated with Smoke Detector, Motion Detector, Exit Sign and so on. Most also come with 3.6mm lens although some will allow lens to be replaced.
Over the time, most practical design has been Dome Camera with its aesthetic appearance it blends into surroundings, especially with drop down sealing, great for use in stores, lobbies, gas stations and other public places. Practical solution for covert installation are also, Motion and Smoke Detector cameras, they are absolutely not substitute for your security alarm or fire protection. They should always be selected based on the location of the camera (inside/outside), distance from the monitoring object, light condition and budget.
When shopping for security cameras, customers are faced with the fact that they will need to select one or another recording device.
The days of well-known CCTV time-lapse VCR recorder are almost over.
Although some customers still prefer this old fashioned recording solution, it is well worth to invest some extra money to purchase a good quality digital video recorder (DVR). Digital recorder transfers analog camera video feed into digital format, and stores it on hard drive. There are two major types of digital recorders on the market right now.
PC Based Systems.
A special board and software installed on the computer will allow camera inputs and store video on the hard drive.
Many people are under the misconception that personal computer with additional hardware installed, will do the job. This explains the hundreds of companies that have hung up a sign, taken out some ads and begun working out of basements and garages, holding themselves out to be DVR manufacturers and security specialists. The main problem with this type of CCTV recorders lies in the main component of it... Yes, it is a computer, designed to do unlimited tasks, but non well. The truth is that any computer based digital video recorder is, and will always be vulnerable to software crashes, hang-ups, system instability, virus related problems etc...
Stand Alone Systems.
Very similar in appearance and control functions to standard VCR recorders, are truly remarkable devices. Most video processing is done by hardware, therefore eliminating system crashes, video is also stored on hard drive in digital format. The basic operating system, usually Linux, is permanently stored on special processor, witch is impossible to overwrite or corrupt. Designed and manufactured with single application in mind, it is by far better in performance and reliability to its PC based rival.
Some DVR systems will even have remote monitoring capability, useful when monitoring is required in different locations through Internet or network. Most important futures to look for when selecting the right DVR recorder are motion detection and frame speed. The higher the frame speed the more fluent video recording. Motion detection will allow recording video from each camera only when motion is detected; this is great for extending video recording time.
Security Monitors.
Video from Security recorder could be displayed on regular TV monitor. It is OK to do it this way, for baby monitoring or residential application, when quality of the picture is not that important. However for professional installation, security monitors are as much important as cameras. They offer extended life of picture tube (necessary with any static picture, that can cause picture burnout) and much grater resolution.
Cables and wiring.
Finally any camera installation will require proper wiring. Good quality cable will prevent video degradation over long distance runs. It is recommended to use RG59 or RG6 coaxial cables as it is fully shielded and will prevent video loss up to 400 ft. Coaxial cables will require BNC connectors and proper installation possibly done by experienced technician. In short runs plug and play non-coaxial cables with factory installed BNC connectors may be used (up to 150 ft.). The plug and play cables are easy enough to install by not experienced users.
Cables for CCTV cameras consist of two cables bundled in one jacket. One cable for video and one for power delivery.
Conclusion.
Every CCTV system is as good and reliable as its weakest component. With this in mind, investing on highest quality and performance cameras, while purchasing low performance recorder, from economical and practical standpoint just does not make sense.
For example, why use CCTV cameras with 500 TV lines of resolution with monitor that offers only 380 or less. All the benefit of high-resolution camera is affectively sacrificed by limited capability of monitor. Asking questions is important before purchasing video security system, and your vendor will probably be able to give more details and recommend equipment for specific needs and requirements.
New Cardio Glide Exercise Bike Price Tob-195 Cuisinart Good Start Formula Coupons Printable Discounted
Monday, November 28, 2011
Estimating Home Repair and Improvement Costs
One of the biggest unknowns for many homeowners is how to estimate home repair costs. Depending on who writes the estimate, it can be confusing and very difficult to understand exactly what is included and what is the actual amount of money you'll be expected to pay. I can't teach you, in one page, to be a professional estimator. It takes years of experience and is a constant learning process. My goal here is to provide you with a basic understanding of the methods used by estimators in for determining costs. It all starts with quantities. How much of each particular product or service do you need?
Breaking Down Repair Cost Measurements
Most things in construction are measured in linear feet, square feet, and square yards. Many of you may already know this.If so, feel free to skip ahead. But, I'm starting from the very beginning for those that may be completely unfamiliar with these terms. Linear feet is the most simple. If you pull your tape measure from one end of a straight wall to the other and it measures: 10 ft 6 in, then you have 10'6" linear feet of wall. Finish carpenters use linear feet to measure trim, base boards, and cabinets. For example: If you were remodeling your kitchen and replacing the cabinets, you would measure the length of each individual cabinet to determine that you need 18 linear feet (lf) of lower cabinets and 22 (lf) of upper cabinets.
The next type of measurement I'm going to talk about is square feet. This probably the most often used measurement in construction and it's pretty simple. basically, were multiplying 2 separate measurements. If you wanted to find the square footage of a bedroom floor for example, you would multiply the width of the room by the length. If the room is 12 ft wide and 15 ft long: 15x12=180 square feet. If you need the square footage of a wall in the same room, you would simply multiply length x height. Square feet measurements are used for the majority of household repairs including: painting, drywall flooring, counter tops, and many more. Square yards is another measurement used in cost estimating, primarily for carpet and other flooring. To find the square yardage of an area, you would divide the square feet by 9. So if a room was 10 ft x 9 ft (90 SQ FT) divide by 9 and you've got 10 square yards. Measuring for carpet is a little more complicated than finding the square yardage of a room. For more info on that check out our flooring page.
Defining the Scope of Work for Home Repairs
Now that we understand the measurement process a little better, let move on to preparing the Estimate. It all starts with the scope of work. Let's say we're going to remodel the kitchen. Make a line item listing each home repair.
Replace Cabinets- 18 lf lower, 22 lf upper
Paint Ceiling and Walls- 192 sf ceiling, 240 sf walls,
Remove Linoleum Flooring- 156 sf
Install Ceramic Tile Floor- 156 sf
Install Granite Counter Tops- 36 sf
Install Ceramic Tile Back Splash- 27 sf
Install (6) recessed light in ceiling
Install New Appliances- Built-in Double Oven, Glass Cook Top, Vent Hood, Dishwasher
Install New Sink and Faucet
Stain and Finish Cabinets
Building the Cost Estimate
The simplest method for determining the cost of your project is to have general contractors bid the entire project. Try and line up at least 3 GC's to give you quotes on the project. Schedule different appointment times for each of them. You don't want them all there together, but casually mention that you are expecting other bids. Hopefully this will make them more competitive. The following tips may be helpful in the interview process.
If you have any questions or would like their input on the project, prepare a list and use it with all bidders. We do this to make sure the process is equal. Decide on a time frame for when you would like their Estimate.(A week to 10 days should be enough time). This will show you something about their ability to do things promptly and meet deadlines. If you want the contractor to include all of the labor and materials in their bids, you need to specify certain items like appliances and flooring to insure you get the quality you want. An experienced, qualified contractor would ask you these questions own their own. Ask them to include an estimated time (# of days or weeks) that it will take to complete the project. Tell them you will need a list of the subcontractors they will be using.(so you can check them out and get lien releases to make sure they have been paid).
After you have completed the interview process, just sit back and wait for the bids. When you receive them, compare them closely to make sure they are equal. Look for exceptions or exclusions in the fine print. Some people may leave out items that were in your scope. This may be OK, you just need to know up front. If you are satisfied with the number of bids you've received, select the Cost Estimate you believe suits you best and move forward. If you are unable to get multiple bids, keep reading and you'll find tips on how to determine if the prices are fair.
If you want to contract your own work, you will need to price each phase of the work and the put it all together to build an estimate of your home repair costs. Let's begin with any areas of the work you may be planning to do yourself. Maybe your going to do the painting or stain the cabinets. In this case, your only expenses should be materials and any new tools you may need. When making your material list, don't forget the small misc. items you'll need. When painting, in addition to the paint itself, don't forget, caulking, putty, paint thinner, and plastic to cover floors or furniture. These are low cost items, but it all adds up. After you have estimated the material cost, it's a good idea to add about 10% contingency for mistakes or unexpected problems that arise (there are always a few). Make a line item for each phase of the job you plan on doing yourself.
Now we're ready to get sub bids for the rest of the home repair costs. Finding the right subcontractors is they key to a smooth, organized project. All it takes is one bad one to mess it up for everyone. Make appointments with subs for each phase of the job. It's a good idea to schedule appointments with different trades at the same time to get feedback on things one trade may need to do for another. For example: The plumber or electrician may need to relocate pipes or wiring before the carpenter installs the new cabinets. But, as a rule, don't schedule subs of the same trade at the same time. You need to get a feel for each individual without a competition going on. Give each bidder a copy of your entire scope of work so he knows up front what circumstances he will be working with. He may raise questions you haven't thought about. Make it clear if you plan on providing any materials or fixtures, such as appliances or lighting.
If you want the sub to include everything, either specify what you want or ask them for an allowance. An allowance is a designated amount of money allowed for a particular item. For instance: if you have a 0 allowance for a ceiling fan, that amount would be set aside in the contract. After looking, you decide that the fan you really want is 9. You would owe the additional 9 to the contractor. If it's less, you would receive a credit. This is a good way to get estimates, but I would recommend always selecting what you want rather than leaving it up to the contractor, to insure you receive the value that you're paying for. If you have an allowance, you may be able to save some money by finding bargains on clearance or used items. Once you've received all of your sub bids, make your selections and combine the sub bids with the line item prices for the things you're doing yourself and the total will be the final cost of repairs for your home. It is a good idea to then add 5-10% contingency. There are usually unexpected things that come up. If they don't, you'll still have the money, but, if more costs do arise, you will have planned for it.
Checking the Home Repair Costs
The final thing I'd like to discuss about home repair costs is how to determine if you're getting a fair price. The simplest way is to have multiple bids when compiling your Cost Estimate. If you have the following 4 prices:
,000, ,000, ,500, ,900
It's pretty clear that the market price should be in the ,000 - ,000 range and the ,000 price is high. However you may not be able to get 4 bids. You may only get 1.If you haven't received enough bids to write an estimate of your home repair costs that you feel comfortable with, you can do some research using the estimating techniques we discussed earlier. Use the footage measurements and make some phone calls or visit home improvement centers to check prices. For example: You need 156 sf of ceramic tile. Call several tile contractors and ask them what they charge per: sf to install floor tile (labor only). After making several calls you determine that the labor price should be about per sf. You know from your previous shopping that your tile is per: sf and misc materials are $.50 per: sf, the following formula can help you check the costs:
Labor .00 Materials .50
Total sf price .50 x 156 sf = 82.00 %2B 20% O&P = 6.40= Total Price 78.40
Adding 20-30% for overhead and profit is not unreasonable, but if your using small contractors, you may not need to. If you receive a bid for 00, it is probably high.This process can be used with many of the items in your Cost Estimate that are priced based on footage measurements. It's not an exact science, but it can help you know if your in the ball park. The exception would be very small projects. If all your doing is a small bathroom, contractors will probably not bid it by the foot because they can't make any money that way. It is really impossible to estimate costs for some services, particularly: plumbing, electrical, and HVAC. The only option, even for professional estimators is to use multiple bids. Spend the extra time if necessary. It will be worth it.
I would like to conclude this topic by offering some advice that I have learned the hard way.
The cheapest Cost Estimate is not always the best. If you have 3 prices and one is half the amount of the next lowest, be careful. They may have missed something, or very possibly, just don't know what they're doing. This is tempting, even for veteran contractors. But, if the sub or GC has under bid the project and can't finish, you've got a big problem. I've been on both sides of this and it never turns out good for either side. Don,t lie to yourself. If you've gotten your bids and done your research and the Cost Estimate looks like a ,000 project, but you only have ,000, it's still a ,000 project. Don't proceed, thinking you will find a way to save ,000. You may end up with torn up house you can't finish. Either take something out of wait awhile until you have the needed funds. Finally, make sure your pricing is up to date. Some services and materials can fluctuate greatly for various reasons. If it's been several months since you did your estimate, check with suppliers and contractors to be sure the prices are still good.
Hopefully, your armed with a little more knowledge and ammunition for preparing you Cost Estimate. Proceed with caution and Good Luck!
Tuesday, November 22, 2011
Regalo Extra Tall Top of Stair Gate, White
!±8± Regalo Extra Tall Top of Stair Gate, White
Post Date : Nov 22, 2011 19:45:30 | Usually ships in 24 hours
New! The Regalo Top of Stair Gate offers a universal installation kit that fits most stairway applications. Simple Glide Technology allows gate to expand and fit stairways 32" up to 53" and easily expand inward and outward while passing through. At 35" tall, this gate is perfect for those little climbers. Easy to install! Adapter kit is included and does not require any drilling into your banister or woodwork.
- Expands to fit openings 32" - 53" wide and is 35" tall
- Adapter kit included
- Simple squeeze latch makes accessibility easy
- Meets all currents safety standards; PVC free
- JPMA certified
Wednesday, November 16, 2011
Dreambaby Retractable Gate, White
!±8± Dreambaby Retractable Gate, White
Post Date : Nov 16, 2011 12:00:07 | Usually ships in 24 hours
Dream Baby Retractable GateThe Dream Baby Retractable Gate can be used indoors and outdoors, expands to 55" and comes complete with two sets of mounting hardware so it can be easily relocated in two different locations. The Dream Baby Retractable Gate is UV protected, easy to install, moves easily from location to location, and the hardware is galvanized steel. The Model L820 Retractable Security Gate is suitable for doorways, hallways and stairs. It will help to ensure the safety and security of your baby or toddler.
More Specification..!!
Monday, November 7, 2011
Safety 1st Wooden Swing Gate, Espresso
!±8± Safety 1st Wooden Swing Gate, Espresso
Post Date : Nov 07, 2011 16:38:19 | Usually ships in 24 hours
- Adjustable from 30" to 48"
- 26" high
- Beautiful dark wood to enhance the home
- Hardware mounted
- Swings open
More Specification..!!
Safety 1st Wooden Swing Gate, Espresso
Wednesday, October 19, 2011
Friday, October 14, 2011
Sunday, October 9, 2011
Superyard 3 in 1 Metal Curve Gate, Bronze
!±8± Superyard 3 in 1 Metal Curve Gate, Bronze
North State 3 In 1 Metal Petyard Rustic.
- Includes one gate panel with childproof double locking system for safety
- Gate includes stay open feature and is self closing
- Comes with six removable and adjustable panels and extends to 144" wide
- Allows you to extend out as a large extra-wide barrier
- Curve top design
Tuesday, October 4, 2011
Part 3 - The Wind in the Willows by Kenneth Grahame (Chs 10-12)
Friday, September 30, 2011
Monday, September 26, 2011
Dreambaby Extra Tall Pressure Mount Hallway Gate with Extensions, Black
!±8± Dreambaby Extra Tall Pressure Mount Hallway Gate with Extensions, Black
Dream Baby Extra Tall Hallway Security Gate Combo The Dream Baby Extra Tall Hallway Security Gate includes the Extra Tall Hallway Security Gate and two extenisons, one 3 1/2 in. and one 7 in. The baby gate and extensions come in two colors to fit just about any home decor. The safety gate measures 1 meter in height which is different than any other baby gates. Dream Baby makes baby gates which are durable and will last long to work with pets as well. The safety gate also swings closed autom
Thursday, September 22, 2011
Extra Tall Hallway Security Gate - White
!±8± Extra Tall Hallway Security Gate - White
Post Date : Sep 22, 2011 08:36:27 | Usually ships in 1-2 business days
As your toddler starts grow and run around, curiously investigating everything and becomes more independent, it is very important to keep him or her out of potentially harmful places. Dream Baby Safety Gates will help keep baby out of harm's way. This Extra Tall Hallway Security Gate is the perfect solution for keeping your little angel safe and within sight. The sturdy white metal frame construction of this gate is also great for keeping your pets within certain limits of your home. Opening the gate is an easy one-handed operation for adults, yet child and pet-proof. Gate conveniently opens in both directions and swings closed automatically. Designed to fit openings from 38 - 42 1/2, this security gate requires not tool assembly as it is pressure mounted, and is suitable for wide doorways, hallways and stairs.
More Specification..!!
Saved Sd253 Breadmaker Best Prices Floor Lamp Lighting Urban Trampoline Top Quality
Monday, September 19, 2011
Richell Wood Freestanding Pet Gate, Large, Autumn Matte Finish
!±8± Richell Wood Freestanding Pet Gate, Large, Autumn Matte Finish
Post Date : Sep 19, 2011 11:16:30 | Usually ships in 24 hours
- Freestanding gate with side panels for safely confining pets
- No installation necessary; adjustable width from 39.8 to 71.3 inches
- Wide base prevents tipping; rubber feet protect floors; folds for storing
- Low enough for people to stride over; beautiful hardwood finish
- Measures 39.8 to 71.3 by 17.7 by 20.1 inches
More Specification..!!
Richell Wood Freestanding Pet Gate, Large, Autumn Matte Finish
Discounted Precor 556 Efx Last Minute Generator Manufacturers